Automatic Drawing-in Machine
This automatic drawing-in machine is ideal for modern textile enterprises needing small-batch, high-difficulty, quick-delivery production. It supports high-density cotton (80s/100s) and a wide yarn count range, works with standard/double/air-jet loom reeds, and accommodates flexible heald frame configurations.
Yarn Module
The yarns tensed on the yarn creel are separated from the yarn components and sent to the rapier tape hook. Then cross the drop wire, heald wire and reed, the yarn is expelled from the rapier tape hook and sucked up by the yarn absorption device. The yarn sensor is used to check whether the yarn has been properly drawing in.
Warp Stop Module
The drop wire library provide the drop wire and the drop wire separator will Separate each of them in turn. At the same time the rotating cylinder will catch of them and pass them on the right position. After the yarn is drawing in, the distributor will pop up the drop wire to the warp stop bar.
Wire Heald Mould
The automatic drawing machine get the wire heald from wire heald library. And the Separating knife will separate each of them then pass them to the conveyor belt, the eyelet of the wire heald are placed to the drawing in position before the heald is drawing in. After drawing in the wire heald, the wire heald will be taken out to the heald frame or heald bar and the heald bar will be put on the supporting structure.
Reed Mould
Sandwiched in the reed clip,used for pass the reed holder can stabilize the reed, the reed rack is moving in the rails of the reed when drawing in. And the reed monitor device checks whether it moving in the correct position of the reed.if correct, then insert the reed knife and open the reed teeth to a certain width so that the rapier tape hook and yarn can pass through successful.
Visible Automation Efficiencies
Related Accessories
Factory Photos
Main technical parameters
| Machine Type |
TD-A/M/L |
| Width of warp beam (cm) |
230/280/400 |
| Maximum diameter of warp beam wheel (mm) |
1200 |
| Number of warp beams |
2 |
| Maximum Warping speed (pieces/minute) |
165 |
| Warp yarn count |
6-120 S |
| Split layer function |
support |
| Applicable to heald type |
J type,C type,O type |
| Thickness of healds (mm) |
0.25-0.38 |
| Length of healds (mm) |
260-382 |
| Size of heald eye (mm) |
Minimum 1.2×5.5 |
| Maximum number of frames/healds |
20/16 |
| Width of droppers (mm) |
7-11 |
| Length of droppers (mm) |
125-180 |
| Thickness of droppers (mm) |
0.15-0.65 |
| Maximum number of droppers |
6 |
FAQ
(1) Q: Why Choose Our Company?
A: History: TONGDA Textile Machinery Group was establish in 1952. Now have more than 65 years old history. Main Products: TONGDA Group specializes in design, manufacturing, and marketing of a wide range of Textile machinery, it has seven branch companies, mainly produces ring spinning frame, roving frame, weaving machine (water Jet loom/Air jet loom/rapier Loom), warping machine, quilting machine and nonwoven machine. We provide design for complete line of spinning mill for cotton yarn, polyester yarn, wool yarn, flax/linen yarn, machines including blow room, carding machine, draw frame, roving frame, ring frame, winding machine, open end spinning machine and the air conditioning system and waste collection system for spinning mill. We also provide workshop layout design and trench design, and air pipe layout design.
(2) Q: How's the after-sale service?
A: We offer engineers available to service overseas under merchandiser's supervision and translation.
(3) Q: Are you available for on-the-spot invitation?
A: We do welcome our new and old friends come here to have a visitation. Besides, we would send you our exposition and relative information to promote a face-to-face meeting if you'd like to.
(4) Q: Is the price offered changeable?
A: We offer reasonable price for every client, and the price is changeable according to purchasing amount.
(5) Q: How about the quality?
A: The main subassembly and raw materials are all supplied by large companies. Key parts are research and developed by our own staff. Professional assembly line work and strict quality test system can ensure your high quality requirement.
(6) Q: Are you a manufacturer or Trade Company?
A: We are a professional manufacturer holding our own International Trade Department, for that we can better understand customer's needs and offer a reasonable price.
(7) Q: Product /Quality Guarantee and After Sale Service?
A: 1 year warranty for the International standard. We are work online 24 hours. If you have any questions about our machine you can contact us.
(8) Q: One-stop Service:
A: We have R&D department including more than 100 engineers which are improving and enlarging our supply range.
(9) Q: Certification?
A: TONGDA is an ISO9001, ISO14001, and ISO13485 company. The products are designed to meet the technical standards of 3C and CE. All the products are certified by the Industry Administration Authority. TONGDA will continue to strive to be a stronger leader in the global market of Cotton machinery and Spinning machinery.
Audited Supplier 
){kind=link}