| Type: | Blowing and Carding System |
|---|---|
| Automation: | Automation |
| Spinning Method: | Ring Spinning |
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier 
FA002D disk plucker is an important machine in blowing-carding line. It is applicable for kinds of raw cotton. Cotton content chemical fiber, middle and long chemical fiber, generally two set of plucker are put into production in parallel. Plucking beater go down interval and rotate with carriage to pluck cotton sequence. Cotton plucked is transported to the next machine via duct.
1.This disk plucker machine is the first process in the whole blowing carding line.
2.It's applicable to pluck various kinds of raw cotton and polyester of the
3.length ≤76mm,and then convey them to the next process through airflow.
|
Production (kg/h) |
800-1000kg |
|
Loading capacity (kg) |
4000 (2 sets) |
|
Outer wall diameter (mm) |
4760 |
|
Inner wall diameter (mm) |
1300 |
|
Speed of carriage (r/min) |
1.6-2.2 |
|
Beater speed (r/min) |
740 |
|
Blade extension from grid (mm) |
2.S-7.5 |
|
Rail diameter (mm) |
5123 |
|
Height (mm) |
3864 |
|
Power (kw) |
4.1 |
|
Net weight (kg) |
About 1600 |
|
Weight (kg) |
Weight (kg)About 80 |
Product details:
FA017 series bale plucker as the first process of blowroom & card is suitable to each kind of cotton and chemical, viscose fibre length less than 76mm. The pluck arm, mounted with two beaters can lift and revolve 180 degrees. The pluck arm moved to and back to pluck fibre above bale. The fibre plucked are sucked into the front feeder by air current throught transport duct for further process.
For two plucker beaters, no matter plucker carrier moves either forward or backward, one plucker beater always plucks in clockwise, but another plucks in anticlockwise. Beater hanging device driven by motor rises up anticlockwise plucking beater.
The height can be adjusted according to requirements in order to prevent beater more plucking in depth and keep the load of two beaters basic equal in working to reduce abrasion of spare parts such as belt and bearings etc. Dual saw-blade beater plucks flock evenly up and down with high and small dispersion rate in order to achieve plucking block finely, little and evenly from beginning in blowing-carding line technology.
Intermittent vertical stroke of detacher can be adjuster steplessly within the range of 0.1~19.9mm/times. The travel speed of plucker carrier is adjusted by frequency inverter at 5~15m/min.
Main technical parameters
|
Main technical parameters
|
|
|
Milling depth (mm) |
0. T20 (adjustable) |
|
Basic length of machine (mm) |
20400 |
|
Maximum length 52000 |
|
|
Maximum bale height (mm) |
1600 |
|
Pluck roller |
Control by pulley or inverter |
|
Total power (kw) |
7.5 |
|
Net weight (kg) |
7000 |
|
Working width (mm) |
2300 |
1700 |
|
Production (kg/h) |
1500 |
1000 |
|
Effective plucking width (mm) |
2300 |
1700 |
|
A (mm) |
6362 |
5162 |
FA027 Series multi mixer is used for blending cotton, chemical fiber or blends. After fiber is filed into FA027,Airflow blows it into every hopper evenly to form a airflow blending. The fiber in every hopper is conveyed in a 90° turn. And the excessive fiber is thrown into blending room to attain fine mixture.
Intensive Three lines mnsure, all kinds of fiber can be even blended.
The pressure is hopper can be automatically monitored, controlling bale plucker to start or stop.
Transport belt and spike lattice are controlled by motor with inverter, can be stepless speed regulation.
Sensitive detect section, obtaining continuous running of the whole process.
|
Applications |
Used for processing cotton and chemical fibers or blends in length less than 65mm |
|
Transport belt speed (m/min) |
0. 06~0.81 |
|
Spike lattice speed (m/min) |
13. 3~129. 5 |
|
Overall dimension (L x W x H) (mm) |
6787 x A x 4122 |
|
Net weight (kg) |
5800 |
FA107 Single Roller Cleaner is an efficient pre-process cleaner, suitable for every kind of raw cotton. Material inside is opened sufficiently by flexibility beating several times in freedom after five and half circles. During opening, cotton is separated from dust. Material opened and purified is transported next process.
Opened with free hold, decrease the firber damage.
V type beater, flexible and high efficient.
Beater can be driven by pulley or inverter motor.
Grids distance cann be adjusted manually, meet the variety processing demand. Intermittent or continuous exhaust device is optional.
Specia construction, increase removing of dust and short fiber.
|
Production (kg/h) |
1200 |
|
Working width (mm) |
1600 |
|
Pinned beater diameter (mm) |
<D750 |
|
Pinned beater |
Control by pulley or inverter |
|
Power installed (kw) |
11 |
|
Overall dimension |
2300x1150x1950 |
|
(LxWxH)(mm) |
Added tuft: overall height 2450 |
|
Net weight (kg) |
1500 |
|
Type |
FA117 |
FA117-160 |
|
Out put (kg/h) |
800 |
1000 |
|
Suitable material |
Natural and manmade fiber in Iengthlessthan76mm |
|
|
Working width(mm) |
1060 |
1600 |
|
Feed roller speed (r/min) |
18^85, stepless speed adjusting according to output |
|
|
Gill beater speed (r/min) |
480, 540, 600. pulley diameter (Option: Inverter) |
changeable accrofing to output |
|
Power installed (KW) |
3. 55 |
5. 1 |
|
Profile dimension (L x W x H) (mm) |
1560x1520x2870 |
2100x1520x2870 |
|
Applications |
It is used for fiber in length less than 88mm |
|
Working width |
500 |
|
Overall dimension(mm) |
1864x850x2792 (Lx WxH) |
|
Net Weight (kg) |
300 |
(1) Q: Why Choose Our Company?
A: History: TONGDA Textile Machinery Group was establish in 1952. Now have more than 65 years old history. Main Products: TONGDA Group specializes in design, manufacturing, and marketing of a wide range of Textile machinery, it has seven branch companies, mainly produces ring spinning frame, roving frame, weaving machine (water Jet loom/Air jet loom/rapier Loom), warping machine, quilting machine and nonwoven machine. We provide design for complete line of spinning mill for cotton yarn, polyester yarn, wool yarn, flax/linen yarn, machines including blow room, carding machine, draw frame, roving frame, ring frame, winding machine, open end spinning machine and the air conditioning system and waste collection system for spinning mill. We also provide workshop layout design and trench design, and air pipe layout design.
(2) Q: How's the after-sale service?
A: We offer engineers available to service overseas under merchandiser's supervision and translation.
(3) Q: Are you available for on-the-spot invitation?
A: We do welcome our new and old friends come here to have a visitation. Besides, we would send you our exposition and relative information to promote a face-to-face meeting if you'd like to.
(4) Q: Is the price offered changeable?
A: We offer reasonable price for every client, and the price is changeable according to purchasing amount.
(5) Q: How about the quality?
A: The main subassembly and raw materials are all supplied by large companies. Key parts are research and developed by our own staff. Professional assembly line work and strict quality test system can ensure your high quality requirement.
(6) Q: Are you a manufacturer or Trade Company?
A: We are a professional manufacturer holding our own International Trade Department, for that we can better understand customer's needs and offer a reasonable price.
(7) Q: Product /Quality Guarantee and After Sale Service?
A: 1 year warranty for the International standard. We are work online 24 hours. If you have any questions about our machine you can contact us.
(8) Q: One-stop Service:
A: We have R&D department including more than 100 engineers which are improving and enlarging our supply range.
(9) Q: Certification?
A: TONGDA is an ISO9001, ISO14001, and ISO13485 company. The products are designed to meet the technical standards of 3C and CE. All the products are certified by the Industry Administration Authority. TONGDA will continue to strive to be a stronger leader in the global market of Cotton machinery and Spinning machinery.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}